TIDAL FERIOS
The all new TIDAL Ferios G2. We have pushed the concept of the first Ferios power amplifier to its extreme and developed an all new power supply with a true power regulation. Thus, the TIDAL Ferios mono amplifier board is certain for all practical means and purposes to be supplied with never failing power reserves and a lavish feed of clean current that will drive every imaginable speaker with ease.
The generous supply of additional power is merely a welcome byproduct, really. The real goal was the absolute relaxation with which the Ferios performs, to the extent where any attempted description of sound attributes becomes meaningless. The Ferios sets simply a new benchmark over the former award winning generation.
SPECIFICATIONS
true mono reference power amplifier with linear power supply
regulated active power supply with 2 x 800VA non-noise toriod transformers, completetly magnetical shielded and mechanical decoupled
linear voltage power supply for ripple-free voltage and current stabilization for the two amplifier modules
500.000 µF stabilisation capacity, ultra fast response with high-grade-long-life-capacitors
elimination of deleterious resonances by all massive aluminum parts and braces inside, excellent torsional and longitudinal rigidity
in-house made multilayer PCB (printed circuit board) with 105 µm copper per layer
hand selected transistors, measured and matched with a precision better than 1%
DC-coupled input circuit, without coupling capacitors or relay in the signal path from the input to the output
ultralow impedance capacitors directly at the transistors for most shortest connection
TIDAL proprietary APM system (amplifier protection management) is completely outside of the signal path
TIDAL APM System is an isolated and completely autarkic system to manage and control the power amps safety: output current in relation to output-voltage, short circuit current, DC- offset, under-voltage and over-voltage
optional: fully autarcic working active crossover LPX-monomodule for active amping to control the bass section of TIDAL reference speakers, perfectly matched in phase and frequency, different frequencies and level adjustable to trim bass response perfectly to each room and/or taste
intelligent softstart system, remote power on/off by TIDAL pre amplifiers via RJ45 ethernet cable
rated power output at 8 ohm: 1 x 400 watts continuous rms power
rated power output at 4 ohm: 1 x 800 watts continuous rms power
bandwith: 1Hz - 400 kHz (-3 dB), measured with impedance load
length, width, height: 60cm x 44cm x 32,5cm / 23,6” x 17,3” x 12,3”
power consumption: < 1 W in stand-by mode
damping factor: ideal damping factor for life like music reproduction, perfectly even over the whole spectrum
- weight: 63 Kg / 140 lbs. (packaging excluded)
The all new TIDAL Ferios G2. We have pushed the concept of the first Ferios power amplifier to its extreme and developed an all new power supply with a true power regulation. Thus, the TIDAL Ferios mono amplifier board is certain for all practical means and purposes to be supplied with never failing power reserves and a lavish feed of clean current that will drive every imaginable speaker with ease.
The generous supply of additional power is merely a welcome byproduct, really. The real goal was the absolute relaxation with which the Ferios performs, to the extent where any attempted description of sound attributes becomes meaningless. The Ferios sets simply a new benchmark over the former award winning generation.
